How To Reset Your Home Security System In Rockford

An important advantage of getting your security system installed by trained experts is that you seldom find a reason to concern yourself with it. Even so, there could be times when you have to reset your alarms in Rockford. If you’re utilizing the ADT Command panel, your system reset usually takes one or two tap of a button when you’ve experienced occurrences like battery changes, power outages, and false alarms.

Check Your Instruction Manual Before Trying to Reset Your Alarm Panel

Here’s a simple yet valuable tip before you try to reset your Rockford home security system, check your manual prior to proceeding. You don't want to compromise your system because you hit a button in error. In addition, control panels could be different if you upgraded from a numbered keypad to a modernized touchscreen interface. If there’s ever a time when you’re struggling to reset your system, don't be reluctant to contact your trusted security specialists.

Resetting Your Rockford Security System Because Of A False Alarm

Typically, a false alarm occurs because of the accidental tripping of a sensor. You may utilize the ADT Command touchscreen or access the ADT mobile app and tap the shield image and type in your security code to switch off the alarms when this occurs. You might be contacted by your 24-hour monitoring specialists, but just let them know you had a false alarm.

Resetting Your Alarm After A Power Outage In Rockford

When you lose power due to a storm or other event, you could start to hear a beeping sound from your central command hub. This lets you know that your home’s defense is running off the battery backup. To reset your unit and silence the constant chirping, you should deactivate and reactivate your system.

Keep in mind, if your power outage lasts for an extended time, you might need a complete reset of your home’s security. Heed the directions in the instruction manual -- normally by putting in your unique passcode and hitting the designated button two times -- and you should be running fine. You could still hear chirping caused by the secondary power source, as it might not stop until the battery charges entirely. Reach out to your home security agent if you are still having difficulties with your ADT system a day after the power is resumed.

How To Reset Your Home Security System After Switching Out A Battery

There will be infrequent times when you will have to switch out a battery within one of your home security components. To do this, you will switch your alarm system to "Test Mode" so you don't trigger a false alarm. When the new battery is put in place, change the system from test mode and resume normal operations. If the control panel is unable to register the piece of equipment or the battery indicator remains on, you may need a full reset of your security system.

Reset Your Rockford Security System When Adding Or Removing A Code

Removing or adding users can be accomplished on your ADT Command interface and your ADT mobile app. You should never have to perform a resetting of your system after adding or removing a user or code. With that being said, if you move into a new property with an existing ADT alarm system, you need to call your home security professional at (815) 242-2899 to set up a new plan. The installation tech will come out and replace outdated parts, place other alarms or cameras (if necessary), and perform a full reset.

An Easy-To-Use Security System Can Be Yours Today

Figuring out how to reset a home security system in Rockford can be frustrating if it isn’t equipped with user-friendly instructions and features. If the time has come to find your functional and powerful home protection system, dial (815) 242-2899 or submit the form below. Our specialists are ready to design the right security system for your property.